Liquid GlazeBone China GlazePigmentCeramic GlazeCeramic FluxesColored Dry Glaze GranulesGlaze InfoCeramic Materials & Additives
模板标签无法动态加载include文件，因为先执行include后执行if，有些内容没对应模板会报错。Bone china glaze series introduction
| Type | Item No. | Firing Temperature (°C) | COE (×10⁻⁷/°C) |
|---|---|---|---|
| Fine China | DP-1 | 1120-1140℃ | 152 |
| Bone China (New Body) | BO-3 | 1120-1140℃ | 208 |
| Bone China (Traditional Body) | DP-1 | 1120-1140℃ | 152 |
| BO-3 | 1120-1140℃ | 208 |
| Application |
|---|
|
The operation steps as follows
1.Add more than 30% water into the glaze lump, mix completely and leave for over 2hours.
2.Loading the glaze into mill machine grind 2 hours.
3.removing iron and filtration , sieving through 200 mesh.
4.adjust density to 60-65 degree.
5. keep the high gap at the 1-1.5 meters from the glaze tub to spray gun.
6.install a pressure regulator in front of spray gun, and adjust the pressure at the 0.8-1.2mm.
7.after glaze firing temperature reach to setting degree. Keep heat on 20-25 minutes.
8.after heat preservation open the kiln door by a third. 9.quickly cool itself. The glaze will achieve to good effect. |
For more customized products and product information, please contact us.
CONTACT
You are welcome to contact us for consultation：
0768-6804421
Contact
Contact
Tel：0768-6804421
Fax：0768-6815186
Email：623118960@qq.com
Mobile：15814944434、18927120683
Address：No. 5 Dayang Road, Xulong Village, Fuyang Town, Chao'an District, Chaozhou City, Guangdong Province, China
Open the official website,
More exciting waiting for you!Copyright © 2025 DAYANG All Rights Reserved.TECHNICAL SUPPORT: 亚商网（潮行通）粤ICP备8888888888号
SEARCH
NO DATA
NO DATA